Tajikistan R780 Grouting pipe
Grouting pipe is a pre embedded grouting pipe system used for permanent sealing of construction joints, cold joints, pipe seepage joints, and gaps between ground walls in concrete. It is very suitable to install grouting pipes between the joints of new and old concrete. When water seeps into the joint, it can be sealed by injecting grout into the PVC port on the surface to seal the joint. The appropriate grouting time can be chosen to be after the concrete curing is completed. Leakage joints can also be permanently sealed using this method.
Category:
Product Description
Grouting pipe is a pre embedded grouting pipe system used for permanent sealing of construction joints, cold joints, pipe seepage joints, and gaps between ground walls in concrete. It is very suitable to install grouting pipes between the joints of new and old concrete. When water seeps into the joint, it can be sealed by injecting grout into the PVC port on the surface to seal the joint. The appropriate grouting time can be chosen to be after the concrete curing is completed. Leakage joints can also be permanently sealed using this method.
| Product Name | Grouting Steel pipe |
| Standards | GB/T 9808-2008, API 5CT |
| Grades | DZ40, DZ60, DZ80, R780, J55, K55, N80, L80, P110, 37Mn5, 36Mn2V, 13Cr, 30CrMo,A106 B,A53 B, ST52-4 |
| Outside diameter | 60mm-178mm |
| Thickness | 4.5-20mm |
| Tolerance for WT | -10%/+12.5% |
| Length | 1-12M |
| Bending allowed | No more than 1.5mm/m |
| Process Method | Beveling/Screening/Hole Drilling/Male Threading/Female Threading/Trapezoidal thread/Pointing |
| Packing | Male and Female threading will be protected by plastic clothes or plastic caps Pointer pipe ends will be bare or as per client request. |
| Application | Highway Construction/Metro Construction/Bridge Construction/Mountain Body Fastening Project /Tunnel Portal/Deep Foundation/Underpinning etc. |
| Shipping term | In bulk ships for quantity above 100tons, Below 100tons order, will be loaded into containers, For an order below 5tons, we usually choose LCL (Less than container load) container, to save the cost for client |
| Shipping port | Qingdao port, or Tianjin port |
| Trade term | CIF, CFR, FOB, EXW |
| Paying term | 30%TT + 70% TT against copy of documents, or 30%TT + 70% LC. |
| Brand name | Hanwu Steel |
Products Display
